Product Description
The HP DesignJet 500, C7770B, is a HP plotter for sale. The hp designjet 500 plotter or plotter designjet 500 is a professional plotter at an exceptional price for architectural, engineering, construction and mechanical design. Hewlett Packard Designjet 500 delivers ultimate line and photo quality with continuous tones, smooth transitions and a wide color gamut. This printer provides rich, brilliant colors from print to print, regardless of ink levels or printhead usage. Precise ink placement ensures crisp, sharp lines and text. HP's color layering technology combines ink drops on a single dot to create smooth color transitions and photo-quality results - even up close. Built-in smart chips identify low ink levels and worn printheads. ZoomSmart scaling technology, easily enlarging any image, allows easy printing from any Windows application. Our HP Designjet 500 price is the best around.
Note: Please consider the upgraded version, HP DesignJet 800 42" plotter. Same plotter but also adds a hard drive for job storage (uses same ink cartridges and printheads)
FEATURES:
CPU: Embedded microprocessor (96 MHz)
Expansion: Two (2) EIO slots (PCI-like) to connect accessories: LAN card and/or HP-GL/2 Accessory card (C7772A)
Standard Connectivity: Parallel (ECP) and USB
Languages supported: HP PCL3 GUI
Model Sheet sizes Roll sizes Core sizes: 8.3 to 42 inches
Length: up to 150 '
Resolution:
Fast Render 300 x 300 dpi 150 x 150 dpi
Halftone 600 x 300 dpi 600 x 300 dpi Normal
Render 600 x 600 dpi 300 x 300 dpi Halftone
600 x 600 dpi 600 x 300 dpi Best (default) Render
600 x 600 dpi 600 x 600 dpi Halftone 600 x 600 dpi
600 x 600 dpi Best (maximum detail) Render 600 x 600 dpi
600 x 600 dpi Halftone 1200 x 600 dpi 1200 x 600 dpi
Accuracy: 0.2 percent of the specified vector length at 73 degrees F, 50-60 percent relative humidity, on HP special polyester film.
Memory Standard: 16 MB
Memory Maximum: 160 MB (in combination with the HP-GL/2 accessory card and a 128 MB memory DIMM). NOTE: The HP-GL/2 accessory card is a pre-requisite to a memory upgrade. A basic 500 platform is PCL3GUI, which will never run out of memory, therefore has no memory upgrade slot was added to the printer. The memory upgrade slot is included on the HP-GL/2 card, which can benefit from additional memory.
Note: Ink cartridges, printheads, and paper not included